View 311-510-0850G_1628514.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

contents overview 2-3 rdm d-subminiature connectors rdm 31 series contacts ? specifications & interface dimensions 4 rdm 31 series contacts 5-8 rdm standard series contacts ? specifications & interface dimensions 9 rdm standard series contacts 10-14 rdm-hf series contacts ? specifications & interface dimensions 15 rdm-hf series contacts 16-19 rdm 75 ohm contacts ? specifications & interface dimensions 20 rdm 75 ohm contacts 21-24 rdm high power contacts ? specifications & interface dimensions 25 rdm high power contacts 26-27 rdm high voltage contacts 28 rdm 40 series for din style housings ? specifications & interface dimensions 29 rdm 40 series for din style housings 30-32 d-subminiature housings d-subminiature ordering guide 33 d-subminiature selection guide 34-35 d-subminiature pcb signal contact selection / mounting options 36 d-subminiature guide pin plates 37 d-subminiature shell dimensions 38 d-subminiature edge mount connectors / pc board footprints 39 d-subminiature right angle mounting dimensions 40 d-subminiature printed circuit board footprint 41-76 cable reference table 77 mounting hole layouts 78 cable assembly procedures 79-88 tools 89-90 other product offerings 91-92 winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com while the information in this publication is believed to be accurate and reliable, all data presented is subject to change with out notice. winchester/retconn disclaims responsibility for any damages resulting from application or any incompleteness or inaccuracies in the information presented. c onsult factory for specific information on the latest design specifications. ds/1
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com series description center outer typical view contact body overview ? rdm product line 14 20 21 22 23 24 26 27 28 29 30 75 ohm crimp similar to the 24 series. specifically designed for an amp housing. standard series; solder / crimp and solder / solder types. rated to 900 mhz. similar to the 20 series, thru 50 ohm. popular with cellu- lar manufacturers. rated to 2 ghz. high power contacts solder, crimp, and p.c. pin type. high voltage contacts, teflon bodies. 75 ohm crimp / crimp popular with computer work station manufacturers. standard series, crimp / crimp for flexible cable, sol- der / solder for semi-rigid cable. rated to 1500 mhz. similar to the 20 series, except 75 ohm impedance. popular with catv / video applications. similar to the 20 series, except, fits into a din housing. din 41612. thru-50 crimp / crimp (cellu- lar mftr.) crimp / crimp for flexible cable solder / sol- der, for semi-rigid cables. din coax contacts for din housings. 50 ohm meet din specifications. plug: female socket receptacle: .040 dia. male pin plug: female socket receptacle: .040 dia. male pin. plug: female socket receptacle: .030 dia. male pin none none plug: female socket receptacle: .040 dia. male pin plug: female socket receptacle: .040 dia. male pin plug: female socket receptacle: .040 dia. male pin plug: female socket receptacle: .040 dia. male pin plug: female socket receptacle: .040 dia. male pin plug: female socket receptacle: .030 dia. male pin plug: female socket receptacle: .020 dia. male pin plug: male receptacle: female plug: male receptacle: female plug: male receptacle: female plug: male receptacle: female plug: male receptacle: female plug: male receptacle: female plug: male receptacle: female plug: male receptacle: female plug: male receptacle: female plug: male receptacle: female plug: male receptacle: female ds/2
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com series description center outer typical view contact body overview ? rdm product line 31 32 37 40 blind mate contact, fits in standard housing. rated to 5 ghz. mates with pkz. high power contacts, solder and crimp types for din housings. similar to 22 series. similar to 30 series, except 75 ohms. similar to 31 series fits in din housing. plug: female socket receptacle: .040 dia. male pin none none plug: female socket receptacle: .015 dia. male pin plug: female socket receptacle: .040 dia. male pin plug: male receptacle: female plug: male receptacle: female plug: male receptacle: female plug: male receptacle: female ds/3
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com 31 series: specifications & interface dimensions mechanical: materials: bodies, plugs: brass per astm b16, 1/2 hd bodies, receptacles: beryllium copper per astm b196 female contacts: beryllium copper per astm b196 male contacts: brass per astm b16, 1/2 hd insulators: teflon per astm d1710 crimp ferrule: annealed copper alloy clip ring: beryllium copper per astm b194 finish: body: gold plated per mil-g-45204 center contact: gold plated per mil-g-45204 clip ring: nickel plated per qq-n-290 mating characteristics: receptacles, outer contact: 3 lbs. maximum insertion on a .1530 +.0001/-.0000 dia. pin and a 4 oz. minimum withdrawl on a .1500 +.0000/-.0001 dia. pin plugs, center contact: 16 oz. maximum insertion on a .0410 +.0001/-.0000 dia. pin and a .5 oz. minimum withdrawl on a .0390 +.0000/-.0001 dia. pin retention in shell: 15 lbs. minimum electrical: impedance: 50 ohms nominal frequency range: 0 to 5.0 ghz insulation resistance: 5000 megaohms minimum contact resistance: (milliohms maximum) center contact: 5.0 outer contact: 3.0 voltage standing wave ratio: 0 to 5.0 ghz straight connector: 1.15 +.02f ghz on rg-316 cable straight connector: 1.15 +.01f ghz on .141 dia. semi-rigid cable environmental: operating temperature: -55oc to +125oc vibration: mil-std-202, method 204, test condition d shock: mil-std-202, method 213, test condition i corrosion resistance: mil-std-202, method 101, condition b general information: 31 series coaxial contacts fit all d-subminiature connectors and are interchangeable with other manufacturers product. available in crimp or solder cable terminations. ds/4 plug interface receptacle interface
rdm 31 series: printed circuit board contacts winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com ds/5 part number mounting hole 310-010-6040g n0. 060a ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. straight plug part number mounting hole 311-010-6040g n0. 060a ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. straight receptacle part number mounting hole 312-010-6040g n0. 060a ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. right angle plug part number mounting hole 313-010-6040g n0. 060a ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. right angle receptacle part number mounting hole 310-010-6140g n0. 061 ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. straight plug dimensions shown are in inches.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com rdm 31 series: printed circuit board contacts ds/6 part number mounting hole 313-010-6140g n0. 061 ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. right angle receptacle part number mounting hole 312-010-6140g n0. 061 ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. part number mounting hole 311-010-6140g n0. 061 ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. straight receptacle right angle plug dimensions shown are in inches. rdm 31 series: crimp / crimp, flexible cable part number cable a dim b dim 310-910-0630g rg- 316, 188 .93 .067 310-910-0631g rg- 316 ds .93 .067 310-910-1160g rg- 141, 58 1.09 .120 310-910-1161g rg- 142, 223 1.09 .120 ? see page 87 for cable assembly procedures: cap 9-07 ? part number shown is for standard gold plating. straight plug
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com rdm 31 series: crimp / crimp, flexible cable ds/7 part number cable a dim b dim c dim 313-910-0630g rg- 316, 188 .77 .067 .50 313-910-0631g rg- 316 ds .77 .067 .50 313-910-1160g rg- 141, 58 .77 .120 .60 313-910-1161g rg-142, 223 .77 .120 .60 ? see page 88 for cable assembly procedures: cap 9-16 ? part number shown is for standard gold plating. right angle receptacle part number cable a dim b dim c dim 312-910-0630g rg- 316, 188 .75 .067 .50 312-910-0631g rg- 316 ds .75 .067 .50 312-910-1160g rg- 141, 58 .75 .120 .60 312-910-1161g rg- 142, 223 .75 .120 .60 ? see page 88 for cable assembly procedures: cap 9-16 ? part number shown is for standard gold plating. right angle plug part number cable a dim b dim 311-910-0630g rg- 316, 188 .89 .067 311-910-0631g rg- 316 ds .89 .067 311-910-1160g rg- 141, 58 1.05 .120 311-910-1161g rg- 142, 223 1.05 .120 ? see page 87 for cable assembly procedures: cap 9-07 ? part number shown is for standard gold plating. straight receptacle rdm 31 series: solder / solder, semi-rigid cable part number cable a dim b dim 310-510-0850g rg- 405 (.085 sr) .79 .090 310-510-1410g rg- 402 (.141 sr) .79 .148 ? see page 83 for cable assembly procedures: cap 5-15 ? part number shown is for standard gold plating. straight plug part number cable a dim b dim 311-510-0850G rg- 405 (.085 sr) .75 .090 311-510-1410g rg- 402 (.141 sr) .75 .148 ? see page 83 for cable assembly procedures: cap 5-15 ? part number shown is for standard gold plating. straight receptacle dimensions shown are in inches.
rdm 31 series: solder / solder, semi-rigid cable winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com ds/8 part number cable a dim b dim c dim 312-510-0850g rg- 405 (.085 sr) .75 .090 .31 312-510-1410g rg- 402 (.141 sr) .75 .148 .31 ? see page 84 for cable assembly procedure: cap 5-16 ? part number shown is for standard gold plating. right angle plug part number cable a dim b dim c dim 313-510-0850g rg- 405 (.085 sr) .77 .090 .31 313-510-1410g rg- 402 (.141 sr) .77 .148 .31 ? see page 84 for cable assembly procedures: cap 5-16 ? part number shown is for standard gold plating. right angle receptacle dimensions shown are in inches.
rdm: specifications & interface dimensions winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com mechanical: materials: bodies, plugs: brass per astm b16, 1/2 hd bodies, receptacles: beryllium copper per astm b196 female contacts: beryllium copper per astm b196 male contacts: brass per astm b16, 1/2 hd insulators: teflon per astm d1710 crimp ferrule: annealed copper alloy clip ring: phosphor bronze per astm b103 finish: body: gold plated per mil-g-45204 center contact: gold plated per mil-g-45204 clip ring: nickel plated per qq-n-290 mating characteristics: receptacles, outer contact: 3 lbs. maximum insertion on a .1530 + .0001 / - .0000 dia. pin and a 4 oz. minimum withdrawl on a .1500 + .0000 / - .0001 dia. pin plugs, center contact: 16 oz. maximum insertion on a .0410 + .0001 /- .0000 dia. pin and .5 oz. minimum withdrawl on a .0390 + .0000 / - .0001 dia. pin retention in shell: plugs and receptacles: 15 lbs. minimum electrical: impedance: 50 ohms nominal frequency range: 0 to 900 mhz insulation resistance: 1000 megaohms minimum contact resistance: ( milliohms maximum) center contact: 5.0 outer contact: 3.0 environmental: operating temperature: -55oc to +125oc vibration: mil-std-202, method 204, test condition d shock: mil-std-202, method 213, test condition l corrosion resistance: mil-std-202, method 101, condition b general information: rdm coaxial contacts fit all d-subminiature connectors and are available in crimp or solder cable terminations. plug interface receptacle interface ds/9 dimensions shown are in inches.
rdm: solder / solder, semi-rigid cable winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com part number cable 200-510-0470g .047 sr 200-510-0850g .085 sr 200-510-1410g .141 sr ? see page 81 for cable assembly procedures: cap 5-09 ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. part number cable adim 202-510-0470g .047 sr .29 202-510-0850g .085 sr .35 202-510-1410g .141 sr .35 ? see page 82 for cable assembly procedures: cap 5-10 ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. straight plug right angle plug ds/10 part number cable adim 203-510-0470g .047 sr .29 203-510-0850g .085 sr .35 203-510-1410g .141 sr .35 right angle receptacle ? see page 82 for cable assembly procedures: cap 5-10 ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. part number cable 201-510-0470g .047 sr 201-510-0850g .085 sr 201-510-1410g .141 sr ? see page 81 for cable assembly procedures: cap 5-09 ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. straight receptacle rdm: solder / solder, flexible cable part number cable a dim 201-510-0360g rg- 178, 196 .93 201-510-0630g rg- 316, 188 .93 201-510-1070g rg- 180, 195 1.03 201-510-1160g rg- 141, 58 1.03 201-510-1161g rg- 142, 223 1.03 ? see page 79 for cable assembly procedures: cap 5-07 ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. straight receptacle dimensions shown are in inches.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com rdm: solder / solder, flexible cable ds/11 part number cable a dim 200-510-0360g rg- 178, 196 .93 200-510-0630g rg- 316, 188 .93 200-510-1070g rg- 180, 195 1.03 200-510-1160g rg- 141, 58 1.03 200-510-1161g rg- 142, 223 1.03 ? see page 79 for cable assembly procedures: cap 5-07 ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. straight plug right angle receptacle part number cable a dim 203-510-0360g rg- 178, 196 .49 203-510-0630g rg- 316, 188 .49 203-510-1070g rg- 180, 195 .49 203-510-1160g rg- 141, 58 .49 203-510-1161g rg- 142, 223 .49 ? see page 80 for cable assembly procedures: cap 5-08 ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. part number cable a dim 202-510-0360g rg- 178, 196 .49 202-510-0630g rg- 316, 188 .49 202-510-1070g rg- 180, 195 .60 202-510-1160g rg- 141, 58 .60 202-510-1161g rg- 142, 223 .60 ? see page 80 for cable assembly procedures: cap 5-08 ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. right angle plug dimensions shown are in inches. rdm: solder / crimp, flexible cable part number cable a dim 201-910-0360g rg- 178, 196 .93 201-910-0630g rg- 316, 188 .93 201-910-1070g rg- 180, 195 1.03 201-910-1160g rg- 141, 58 1.03 201-910-1161g rg- 142, 223 1.03 ? see page 85 for cable assembly procedures: cap 9-01 ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. straight receptacle
rdm: solder / crimp, flexible cable winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com ds/12 part number cable a dim 200-910-0360g rg- 178, 196 .93 200-910-0630g rg- 316, 188 .93 200-910-1070g rg- 180, 195 1.03 200-910-1160g rg- 141, 58 1.03 200-910-1161g rg- 142, 223 1.03 ? see page 85 for cable assembly procedures: cap 9-01 ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. part number cable a dim 203-910-0360g rg- 178, 196 .49 203-910-0630g rg- 316, 188 .49 203-910-1070g rg- 180, 195 .60 203-910-1160g rg- 141, 58 .60 203-910-1161g rg- 142, 223 .60 ? see page 86 for cable assembly procedures: cap 9-02 ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. part number cable a dim 202-910-0360g rg- 178, 196 .49 202-910-0630g rg- 316, 188 .49 202-910-1070g rg- 180, 195 .60 202-910-1160g rg- 141, 58 .60 202-910-1161g rg- 142, 223 .60 ? see page 86 for cable assembly procedures: cap 9-02 ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. straight plug right angle receptacle right angle plug rdm: crimp / crimp, flexible cable ? see page 87 for cable assembly procedures: cap 9-07 ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. part number cable a dim 261-910-0630g rg- 316, 188 .84 261-910-1070g rg- 180, 195 1.00 261-910-1160g rg- 141, 58 1.00 261-910-1161g rg- 142, 223 1.00 straight receptacle part number cable a dim 260-910-0630g rg- 316, 188 .86 260-910-1070g rg- 180, 195 1.01 260-910-1160g rg- 141, 58 1.01 260-910-1161g rg- 142, 223 1.01 ? see page 87 for cable assembly procedures: cap 9-07 ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. straight plug dimensions shown are in inches.
rdm: printed circuit board contacts winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. part number mounting hole 201-010-6140g no. 061 part number mounting hole 200-010-6140g no. 061 ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. part number mounting hole 203-010-6140g no. 061 ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. part number mounting hole 202-010-6140g no. 061 ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. straight receptacle straight plug right angle receptacle right angle plug ds/13 rdm: same - series adapters ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. part number 201-201-0000g receptacle / receptacle dimensions shown are in inches.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com rdm: same - series adapters part number 200-200-0000g part number 200-201-0000g ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. ? part number shown is for standard gold plating. ? for military finish change suffix to h. ? for commercial finish change suffix to c. plug / plug plug / receptacle ds/14 rdm: between series adapters part number 200-350-0000h ? part number shown is for gold plating. ? for nickel plate change suffix to n part number 201-351-0000h ? part number shown is for gold plating. ? for nickel plate change suffix to n rdm plug / smaplug rdm receptacle sma jack part number 201-350-0000h part number 200-351-0000h ? part number shown is for gold plating. ? for nickel plate change suffix to n ? part number shown is for gold plating. ? for nickel plate change suffix to n rdm receptacle smaplug rdm plug / smajack dimensions shown are in inches.
rdm - hf: specifications & interface dimensions winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com mechanical: materials: bodies, plugs: brass per astm b16, 1/2 hd bodies, receptacles: beryllium copper per astm b196 female contacts: beryllium copper per astm b196 male contacts: brass per astm b16, 1/2 hd insulators: teflon per astm d1710 crimp ferrule: annealed copper alloy clip ring: phosphor bronze per astm b103 finish: body: gold plated per mil-g-4504 center contact: gold plated per mil-g-45204 clip ring: nickel plated per qq-n-290 mating characteristics receptacles, outer contact: 3 lbs. maximum insertion on a .1530 +.0001 / - .0000 dia. pin and a 4 oz. minimum withdrawl on a .1500 + .0000/ .0001 dia. pin plugs, center contact: 16oz. maximum insertion on a .0410 + .0001 / - .0000 dia. pin and a 5 oz. minimum withdrawl on a .0390 + .0000 / - .0001 dia. pin retention in shell: 15 lbs. minimum electrical: impedance: 50 ohms nominal frequency range: 0 to 1500 mhz insulation resistance: 1000 megaohms minimum contact resistance: (milliohms maximum) center contact: 5.0 outer contact: 3.0 dielectric withstanding voltage (dwv): straight: 1000 vrms right angle: 800 vrms voltage standing wave ratio: 1.15 maximum from 0 to 1200 mhz 1.35 maximum from 1200 to 1500 mhz environmental: operating temperature: -55oc to +125oc vibration: mil-std-202, method 204, test condition d shock: mil-std-202, method 213, test condition i corrosion resistance: mil-std-202, method 101, condition b general information: rdm coaxial contacts fit all d-subminiature connectors and are interchangeable with other manufacturers product. available in crimp or solder cable terminations. ds/15 plug interface receptacle interface dimensions shown are in inches.
rdm - hf: solder / solder, semi-rigid cable winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com ds/16 part number cable 211-510-0470g .047 sr 211-510-0850g .085 sr 211-510-1410g .141 sr ? see page 81 for cable assembly procedures: cap 5-09 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c part number cable 210-510-0470g .047 sr 210-510-0850g .085 sr 210-510-1410g .141 sr ? see page 81 for cable assembly procedures: cap 5-09 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c part number cable a dim 213-510-0470g .047 sr .29 213-510-0850g .085 sr .35 213-510-1410g .141 sr .35 ? see page 82 for cable assembly procedures: cap 5-10 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c part number cable a dim 212-510-0470g .047 sr .29 212-510-0850g .085 sr .35 212-510-1410g .141 sr .35 ? see page 82 for cable assembly procedures: cap 5-10 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c straight receptacle straight plug right angle receptacle right angle plug rdm - hf: solder / crimp, flexible cable part number cable a dim 211-910-0360g rg- 178, 196 .93 211-910-0630g rg- 316, 188 .93 211-910-1070g rg- 180, 195 1.03 211-910-1160g rg- 141, 58 1.03 211-910-1161g rg- 142, 223 1.03 ? see page 85 for cable assembly procedures: cap 9-01 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c straight receptacle dimensions shown are in inches.
rdm - hf: solder / crimp, flexible cable winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com ds/17 part number cable a dim 210-910-0360g rg- 178, 196 .93 210-910-0630g rg- 316, 188 .93 210-910-1070g rg- 180, 195 1.03 210-910-1160g rg- 141, 58 1.03 210-910-1161g rg- 142, 223 1.03 ? see page 85 for cable assembly procedures: cap 9-01 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c part number cable a dim 213-910-0360g rg- 178, 196 .49 213-910-0630g rg- 316, 188 .49 213-910-1070g rg- 180, 195 .60 213-910-1160g rg- 141, 58 .60 213-910-1161g rg- 142, 223 .60 ? see page 86 for cable assembly procedures: cap 9-02 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c part number cable a dim 212-910-0360g rg- 178, 196 .49 212-910-0630g rg- 316, 188 .49 212-910-1070g rg- 180, 195 .60 212-910-1160g rg- 141, 58 .60 212-910-1161g rg- 142, 223 .60 ? see page 86 for cable assembly procedures: cap 9-02 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c straight plug right angle receptacle right angle plug rdm - hf: crimp / crimp, flexible cable part number cable a dim 291-910-0630g rg- 316, 188 .84 291-910-1070g rg- 180, 195 1.00 291-910-1160g rg- 141, 58 1.00 291-910-1161g rg 142, 223 1.00 ? see page 87 for cable assembly procedures: cap 9-07 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c straight receptacle dimensions shown are in inches.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com rdm - hf: crimp / crimp, flexible cable ds/18 part number cable a dim 290-910-0630g rg- 316, 188 .86 290-910-1070g rg- 180, 195 1.01 290-910-1160g rg- 141, 58 1.01 290-910-1161g rg- 142, 223 1.01 ? see page 87 for cable assembly procedures: cap 9-07 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c straight plug dimensions shown are in inches. rdm - hf: printed circuit board contacts part number mounting hole 211-010-6140g n0. 061 ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c part number mounting hole 210-010-6140g n0. 061 ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c straight receptacle straight plug part number mounting hole 213-010-6140g n0. 061 ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c part number mounting hole 212-010-6140g n0. 061 ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c right angle receptacle right angle plug
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com rdm - hf: same - series adapters ds/19 part number 210-210-0000g ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c part number 211-211-0000g part number 210-211-0000g receptacle / receptacle plug / plug plug / receptacle dimensions shown are in inches.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com rdm 75 ohm: specifications & interface dimensions ds/20 mechanical: materials: bodies, plugs: brass per astm b16, 1/2 hd bodies receptacles: beryllium copper per astm b196 female contacts: beryllium copper per astm b196 male contacts: brass per astm b16, 1/2/ hd insulators: teflon per astm d1710 crimp ferrule: annealed copper alloy clip ring: phosphor bronze per astm b103 finish: body:gold plated per mil-std-45204 center contact: gold plated per mil-std-45204 clip ring: nickel plated per qq-n-290 mating characteristics: receptacles, outer contact: 3 lbs. maximum insertion on a .1530 +.0001 / -.0000 dia. pin and 4 oz. minimum withdrawl on a .1500 +.0000 / -.0001 dia. pin plugs, center contact: 16 oz. maximum insertion on a .0419 +.0001 / -.0000 dia. pin and 5 oz. minimum withdrawl on a .0390 +.0000 /-.0001 dia. pin retension in shell: 15 lbs. minimum electrical: impedance: 75 ohm nominal frequency range: 0 - 2 ghz insulation resistance: 1000 megaohms minimum contact resistance: (milliohms maximum) center contact: 5.0 outer contact: 3.0 dielectric withstanding voltage (dwv): straight: 1000 vrms right angle: 800 vrms voltage standing wave ratio: 1.05 maximum from 0 to 1000 mhz 1.25 maximum from 1000 to 2000 mhz environmental: operating temperature: -55oc to +125oc vibration: mil-std-202, method 204, test condition d shock: mil-std-202, method 213, test condition i corrosion resistance: mil-std-202, method 101, condition b general information: rdm coaxial contacts fit all d-subminiature connectors and are interchangeable with other manufacturers product. available in crimp or solder cable versions. plug interface receptacle interface dimensions shown are in inches.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com rdm 75 ohm: solder / solder, semi-rigid cable ds/21 part number cable 271-510-0470g .047 sr 271-510-0850g .085 sr 271-510-1410g .141 sr ? see page 81 for cable assembly procedures: cap 5-09 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c part number cable 270-510-0470g .047 sr 270-510-0850g .085 sr 270-510-1410g .141 sr ? see page 81 for cable assembly procedures: cap 5-09 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c part number cable a dim 273-510-0470g .047 sr .29 273-510-0850g .085 sr .35 273-510-1410g .141 sr .35 ? see page 82 for cable assembly procedures: cap 5-10 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c part number cable a dim 272-510-0470g .047 sr .29 272-510-0850g .085 sr .35 272-510-1410g .141 sr .35 ? see page 82 for cable assembly procedures: cap 5-10 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c straight receptacle straight plug right angle receptacle right angle plug dim dimensions shown are in inches. rdm 75 ohm: solder / crimp, flexible cable part number cable a dim 271-910-0630g rg- 179 .93 271-910-1070g belden 8218 1.03 ? see page 85 for cable assembly procedures: cap 9-01 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c straight receptacle
ds/22 winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com rdm 75 ohm: solder / crimp, flexible cable part number cable a dim 270-910-0630g rg- 179 .93 270-910-1070g belden 8218 1.03 ? see page 85 for cable assembly procedures: cap 9-01 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c part number cable a dim 273-910-0630g rg- 179 .49 273-910-1070g belden 8218 .60 ? see page 86 for cable assembly procedures: cap 9-02 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c part number cable a dim 272-910-0630g rg- 179 .49 272-910-1070g belden 8218 .60 ? see page 86 for cable assembly procedures: cap 9-02 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c straight plug right angle receptacle right angle plug dimensions shown are in inches. rdm 75 ohm: crimp / crimp, flexible cable part number cable a dim 241-910-0630g rg- 179 .84 241-910-1070g belden 8218 1.00 ? see page 87 for cable assembly procedures: cap 9-07 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c straight receptacle part number cable a dim 240-910-0630g rg- 179 .86 240-910-1070g belden 8218 1.01 ? see page 87 for cable assembly procedures: cap 9-07 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c straight plug
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com rdm 75 ohm: printed circuit board contacts ds/23 part number mounting hole 271-010-6140g no. 061 ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c part number mounting hole 270-010-6140g no. 061 ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c part number mounting hole 273-010-6140g no. 061 part number mounting hole 272-010-6140g no. 061 ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c straight receptacle straight plug right angle receptacle right angle plug dimensions shown are in inches. rdm 75 ohm: same - series adapters part number 271-271-0000g ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c receptacle / receptacle
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com rdm 75 ohm: same - series adapters ds/24 part number 270-270-0000g ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c part number 270-271-0000g ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c plug / plug plug / receptacle dimensions shown are in inches.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com rdm high power: specifications & interface dimensions ds/25 mechanical: materials: bodies, plugs: brass per astm b16, 1/2 hd bodies receptacles: beryllium copper per astm b196 spring washers: phosphor bronze per astm b103 clip ring: phosphor bronze per astm b103 finish: bodies: gold plated per mil-std-45204 clip ring: nickel plated per qq-n-290 mating characteristics: receptacles, outer contact: 3 lbs. maximum insertion on a .1530 +.0001 / -.0000 dia. pin and a 4 oz. minimum withdrawl on a .1500 +.0000 / -.0001 dia. pin retention in shell: 15 lbs. minimum electrical: current rating: 10, 20, 40 amps contact resistance: 3.0 milliohms environmental: operating temperature: -55oc to +125oc vibration: mil-std-202, method 204, test condition d shock: mil-std-202, method 213, test condition i corrosion resistance: mil-std-202, method 101, condition b general information: rdm coaxial contacts fit all d-subminiature connectors and are interchangeable with other manufacturers product. available in crimp or solder cable terminations. plug interface receptacle interface dimensions shown are in inches.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com rdm high power: solder, flexible cable ds/26 part number w ire current a dim gauge rating 221-510-0000g # 8 40 amp .188 221-510-0001g # 12 20 amp .110 221-510-0002g # 16 10 amp .069 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c part number wire gauge current rating a dim 220-510-0000g # 8 40 amp .188 220-510-0001g # 12 20 amp .110 220-510-0002g # 16 10 amp .069 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c part number wire current a dim gauge rating 223-510-0000g # 8 40 amp .188 223-510-0001g # 12 20 amp .110 223-510-0002g # 16 10 amp .069 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c part number wire gauge current rating a dim 222-510-0000g # 8 40 amp .188 222-510-0001g # 12 20 amp .110 222-510-0002g # 16 10 amp .069 straight receptacle straight plug right angle receptacle right angle plug dimensions shown are in inches. .365 rdm high power: crimp, flexible cable part number w ire current a dim gauge rating 221-910-0000g # 8 40 amp .188 221-910-0001g # 12 20 amp .110 221-910-0002g # 16 10 amp .069 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c straight receptacle
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com rdm high power: crimp, flexible cable ds/27 part number wire gauge current rating a dim 220-910-0000g # 8 40 amp .188 220-910-0001g # 12 20 amp .110 220-910-0002g # 16 10 amp .069 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c part number w ire current a dim gauge rating 223-910-0000g # 8 40 amp .188 223-910-0001g # 12 20 amp .110 223-910-0002g # 16 10 amp .069 part number wire gauge current rating a dim 222-910-0000g # 8 40 amp .188 222-910-0001g # 12 20 amp .110 222-910-0002g # 16 10 amp .069 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c straight plug right angle receptacle right angle plug dimensions shown are in inches. rdm high voltage: solder, flexible cable part number wire gauge 230-510-0000h # 16 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c straight plug part number wire gauge 231-510-0000h # 16 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c straight receptacle
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com rdm high voltage: solder, flexible cable ds/28 part number wire gauge 233-510-0000h # 16 part number wire gauge 232-510-0000h # 16 ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c ? part number shown is for standard gold plating. ? for military finish change suffix to h ? for commercial finish change suffix to c right angle receptacle right angle plug dimensions shown are in inches.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com 40 series: specifications & interface dimensions ds/29 mechanical: materials: bodies, plugs: brass per astm b16, 1/2 hd bodies receptacles: beryllium copper per astm b196 female contacts: beryllium copper per astm b196 male contacts: brass per astm b16, 1/2 hd insulators: teflon per astm d1710 crimp ferrule: annealed copper alloy clip ring: beryllium copper per astm b194 finish: body: gold plated per mil-std-45204 center contact: gold plated per mil-std-45204 clip ring: nickel plated per qq-n-290 mating characteristics: receptacles, outer contact: 3 lbs. maximum insertion on a .1530 +.0001 / -.0000 dia. pin and a 4 oz. minimum withdrawl on a .1500 +.0000 / -.0001 dia. pin plugs, center contact: 16 oz. maximum on a .0410 +.0001 / -.0000 dia. pin and 5 oz. minimum withdrawl on a .0390 +.0000 / -.0001 dia. pin retension in shell: 15 lbs. minimum electrical: impedance: 50 ohms nominal frequency range: 0 to 5.0 ghz insulation resistance: 5000 megaohms minimum contact resistance: (milliohms maximum) center contact: 5.0 outer contact: 3.0 voltage standing wave ratio: 0 to 5.0 ghz straight connector: 1.15 +.02f ghz on rg-316 cable straight connector: 1.15 +.01f ghz on .141 dia. semi-rigid cable environmental: operating temperature: -55oc to +125oc vibration: mil-std-202, method 204, test condition d shock: mil-std-202, method 213, test condition i corrosion resistance: mil-std-202, test method 101, condition b general information: 31 series coaxial contacts fit housings per din 41612 available in crimp or solder cable terminations plug interface receptacle interface dimensions shown are in inches.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com rdm 40 series: printed circuit board contacts ds/30 part number mounting hole 403-010-6040g no. 060a part number mounting hole 401-010-6040g no. 060a part number mounting hole 400-010-6040g no. 060a part number mounting hole 402-010-6040g no. 060a ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. straight plug straight receptacle right angle plug right angle receptacle part number mounting hole 400-010-6140g no. 061 ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. straight plug dimensions shown are in inches.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com rdm 40 series: printed circuit board contacts ds/31 part number mounting hole 401-010-6140g no. 061 part number mounting hole a dim 402-010-6140g no. 061 .76 402-010-6141g no. 061 .86 part number mounting hole 403-010-6140g no. 061 ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. ? see page 78 for mounting hole layout. ? part number shown is for standard gold plating. straight receptacle right angle plug right angle receptacle dimensions shown are in inches. rdm 40 series: crimp / crimp, flexible cable part number cable a dim bdim 400-910-0630g rg- 316, 188 .93 .067 400-910-0631g rg- 316, ds .93 .067 400-910-1160g rg- 141, 58 1.09 .120 400-910-1161g rg- 142, 223 1.09 .120 ? see page 87 for cable assembly procedures: cap 9-07 ? part number shown is for standard gold plating. straight plug part number cable a dim bdim 401-910-0630g rg- 316, 188 .86 .067 401-910-0631g rg-316, ds .86 .067 401-910-1160g rg-141, 58 1.02 .120 401-910-1161g rg- 142, 223 1.02 .120 ? see page 87 for cable assembly procedures: cap 9-07 ? part number shown is for standard gold plating. straight receptacle
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com rdm 40 series: crimp / crimp, flexible cable ds/32 part number cable a dim bdim cdim 402-910-0630g rg- 316, 188 .75 .067 .50 402-910-0631g rg- 316, ds .75 .067 .50 402-910-1160g rg- 141, 58 .75 .120 .60 402-910-1161g rg- 142, 223 .75 .120 .60 ? see page 88 for cable assembly procedures: cap 9-16 ? part number shown is for standard gold plating. part number cable a dim bdim cdim 403-910-0630g rg- 316, 188 .71 .067 .50 403-910-0631g rg- 316, ds .71 .067 .50 403-910-1160g rg- 141, 58 .71 .120 .60 403-910-1161g rg- 142, 223 .71 .120 .60 ? see page 88 for cable assembly procedures: cap 9-16 ? part number shown is for standard gold plating. right angle plug right angle receptacle dimensions shown are in inches. rdm 40 series: solder / solder, semi-rigid cable part number cable a dim bdim 400-510-0850g rg- 405 (.085 sr) .79 .090 400-510-1410g rg- 402 (.141 sr) .79 .148 ? see page 83 for cable assembly procedures: cap 5-15 ? part number shown is for standard gold plating. part number cable a dim bdim 401-510-0850g rg- 405 (.085 sr) .72 .090 401-510-1410g rg- 402 (.141 sr) .72 .148 ? see page 83 for cable assembly procedures: cap 5-15 ? part number shown is for standard gold plating. straight receptacle straight plug part number cable a dim bdim c dim 403-510-0850g rg- 405 (.085 sr) .69 .090 .31 403-510-1410g rg- 402 (.141 sr) .69 .148 .31 part number cable a dim bdim c dim 402-510-0850g rg- 405 (.085 sr) .75 .090 .31 402-510-1410g rg- 402 (.141 sr) .75 .148 .31 ? see page 84 for cable assembly procedures: cap 5-16 ? part number shown is for standard gold plating. ? see page 84 for cable assembly procedures: cap 5-16 ? part number shown is for standard gold plating. right angle plug right angle receptacle
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature: connector ordering guide ds/33 standard housings edgemount d-subminiature connectors (rm - 2000 series) note: edgemount coaxial connectors are supplied installed in housing example: rm5w5p-2010-20= 5w5 male edgemount housing, tin plated, without rfi indents, with rdm 20 series coaxial connectors, for use in a .030 thick pc board. example: rm2w7p-50-td= 24w7 male housing, with assembled solder cup contacts, tin plated, with rfi indents, and standard mounting 36
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connector: selection guide ds/34 shell size e 1w1 no. of size 8 contacts: 1 no. of size 20 contacts: 0 5w1 no. of size 8 contacts: 1 no. of size 20 contacts: 4 shell size a 2w2 no. of size 8 contacts: 2 no. of size 20 contacts: 0 3w3 no. of size 8 contacts: 3 no. of size 20 contacts: 0 7w2 no. of size 8 contacts: 2 no. of size 20 contacts: 5 11w1 no. of size 8 contacts: 1 no. of size 20 contacts: 10 4w4 no. of size 8 contacts: 4 no. of size 20 contacts: 0 5w5 no. of size 8 contacts: 5 no. of size 20 contacts: 0 9w4 no. of size 8 contacts: 4 no. of size 20 contacts: 5 21w1 no. of size 8 contacts: 1 no. of size 20 contacts: 20 13w3 no. of size 8 contacts: 3 no. of size 20 contacts: 10 17w2 no. of size 8 contacts: 2 no. of size 20 contacts: 15 shell size b shell size c 6w6 no. of size 8 contacts: 6 no. of size 20 contacts: 0 7w7 no. of size 8 contacts: 7 no. of size 20 contacts: 0
d-subminiature connector: selection guide ds/35 shell size c (continued) 8w8 no. of size 8 contacts: 8 no. of size 20 contacts: 0 13w6 no. of size 8 contacts: 6 no. of size 20 contacts: 7 21wa4 no. of size 8 contacts: 4 no. of size 20 contacts: 17 17w5 no. of size 8 contacts: 5 no. of size 20 contacts: 12 25w3 no. of size 8 contacts: 3 no. of size 20 contacts: 22 21w4 no. of size 8 contacts: 4 no. of size 20 contacts: 17 27w2 no. of size 8 contacts: 2 no. of size 20 contacts: 25 24w7 no. of size 8 contacts: 7 no. of size 20 contacts: 17 36w4 no. of size 8 contacts: 4 no. of size 20 contacts: 32 47w1 no. of size 8 contacts: 1 no. of size 20 contacts: 46 43w2 no. of size 8 contacts: 2 no. of size 20 contacts: 41 shell size d winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature: pcb signal contact selection ds/36 0 - standard 1 - 4-40 clinch nuts 2 - float mount bushings 6 - swaged stand-offs 7- swa ged stand-offs with guide pins ? see page 40 for right angle mounting dimensions d-subminiature: mounting options dimensions shown are in inches.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature: guide pin plates ds/37 female dimensions shown are in inches. male
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature: shell dimensions ds/38 plug shell r eceptacle shell rear shell (plug & receptacle) securing methods roll over tabs rivet gender: p: plug (pin signal contacts) r: receptacle (socket signal contacts) dimensions shown are in inches.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature: edgemount connectors (patent information pending) ds/39 see page 33 for part number selection. dimensions shown are in inches. pc board footprints (male footprint shown ? female footprint is mirror image)
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature: right angle mounting dimensions ds/40 right angle power contacts right angle coaxial contacts dimensions shown are in inches.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/41 2w2 straight coax contacts viewed from component side of pcb. male footprint shown. female footprint mirrored. 3w3 straight coax contacts 4w4 straight coax contacts dimensions shown are in inches. viewed from component side of pcb. male footprint shown. female footprint mirrored. viewed from component side of pcb. male footprint shown. female footprint mirrored. 5w5 straight coax contacts viewed from component side of pcb. male footprint shown. female footprint mirrored.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/42 6w6 straight coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. 7w7 straight coax contacts dimensions shown are in inches. viewed from component side of pcb. male footprint shown. female footprint is mirrored. 8w8 straight coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. 5w1 straight coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/43 7w2 straight coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. dimensions shown are in inches. 11w1 straight coax contacts 9w4 straight coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. viewed from component side of pcb. male footprint shown. female footprint is mirrored. 13w3 straight coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/44 dimensions shown are in inches. 17w2 straight coax contacts 21w1 straight coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. viewed from component side of pcb. male footprint shown. female footprint is mirrored. 13w6 straight coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/45 dimensions shown are in inches. 17w5 straight coax contacts 21wa4 straight coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. viewed from component side of pcb. male footprint shown. female footprint is mirrored. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/46 21w4 straight coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. 25w3 straight coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. dimensions shown are in inches. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/47 dimensions shown are in inches. viewed from component side of pcb. male footprint shown. female footprint is mirrored. 27w2 straight coax contacts 24w7 straight coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/48 viewed from component side of pcb. male footprint shown. female footprint is mirrored. 36w4 straight coax contacts 43w2 straight coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. dimensions shown are in inches. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/49 dimensions shown are in inches. viewed from component side of pcb. male footprint shown. female footprint is mirrored. 47w1 straight coax contacts signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/50 viewed from component side of pcb. male footprint shown. female footprint is mirrored. 2w2 right angle coax contacts mating face of connector 3w3 right angle coax contacts mating face of connector viewed from component side of pcb. male footprint shown. female footprint is mirrored. mating face of connector 4w4 right angle coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. mating face of connector 5w5 right angle coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. dimensions shown are in inches.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connector: footprints ds/51 6w6 right angle coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. mating face of connector 7w7 right angle coax contacts mating face of connector viewed from component side of pcb. male footprint shown. female footprint is mirrored. mating face of connector 8w8 right angle coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. mating face of connector 5w1 right angle coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. dimensions shown are in inches. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/52 7w2 right angle coax contacts mating face of connector viewed from component side of pcb. male footprint shown. female footprint is mirrored. 11w1 right angle coax contacts mating face of connector 9w4 right angle coax contacts mating face of connector 13w3 right angle coax contacts mating face of connector dimensions shown are in inches. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min. viewed from component side of pcb. male footprint shown. female footprint is mirrored. viewed from component side of pcb. male footprint shown. female footprint is mirrored. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min. viewed from component side of pcb. male footprint shown. female footprint is mirrored.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/53 mating face of connector viewed from component side of pcb. male footprint shown. female footprint is mirrored. 17w2 right angle coax contacts 21w1 right angle coax contacts 13w6 right angle coax contacts mating face of connector mating face of connector viewed from component side of pcb. male footprint shown. female footprint is mirrored. viewed from component side of pcb. male footprint shown. female footprint is mirrored. dimensions shown are in inches. mating face of connector viewed from component side of pcb. male footprint shown. female footprint is mirrored. 17w5 right angle coax contacts signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/54 21wa4 right angle coax contacts mating face of connector viewed from component side of pcb. male footprint shown. female footprint is mirrored. mating face of connector 21w4 right angle coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. dimensions shown are in inches. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950? internet: http://www.litton-we d.com d-subminiature connectors: footprints ds/55 mating face of connector viewed from component side of pcb. male footprint shown. female footprint is mirrored. 25w3 right angle coax contacts 27w2 right angle coax contacts mating face of connector viewed from component side of pcb. male footprint shown. female footprint is mirrored. dimensions shown are in inches. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/56 24w7 right angle coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. mating face of connector 36w4 right angle coax contacts mating face of connector viewed from component side of pcb. male footprint shown. female footprint is mirrored. dimensions shown are in inches. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/57 43w2 right angle coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. mating face of connector dimensions shown are in inches. mating face of connector 47w1 right angle coax contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min. signal contact dia. d dim. .040 .055 min. .030 .045 min. .024 .040 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/58 2w2 straight power contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. 3w3 straight power contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. 4w4 straight power contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. 5w5 straight power contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. dimensions shown are in inches. power contact dia. pdim. .125 .144 min. .078 .098 min. power contact dia. pdim. .125 .144 min. .078 .098 min. power contact dia. pdim. .125 .144 min. .078 .098 min. power contact dia. pdim. .125 .144 min. .078 .098 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/59 6w6 straight power contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. 7w7 straight power contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. 8w8 straight power contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. dimensions shown are in inches. power contact dia. pdim. .125 .144 min. .078 .098 min. power contact dia. pdim. .125 .144 min. .078 .098 min. power contact dia. pdim. .125 .144 min. .078 .098 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/60 5w1 straight power contacts 7w2 straight power contacts 11w1 straight power contacts 9w4 straight power contacts dimensions shown are in inches. viewed from component side of pcb. male footprint shown. female footprint is mirrored. power contact dia. pdim. .125 .144 min. .078 .098 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. viewed from component side of pcb. male footprint shown. female footprint is mirrored. power contact dia. pdim. .125 .144 min. .078 .098 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. viewed from component side of pcb. male footprint shown. female footprint is mirrored. power contact dia. pdim. .125 .144 min. .078 .098 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. viewed from component side of pcb. male footprint shown. female footprint is mirrored. power contact dia. pdim. .125 .144 min. .078 .098 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/61 13w3 straight power contacts 17w2 straight power contacts 21w1 straight power contacts dimensions shown are in inches. viewed from component side of pcb. male footprint shown. female footprint is mirrored. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. viewed from component side of pcb. male footprint shown. female footprint is mirrored. power contact dia. pdim. .125 .144 min. .078 .098 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. viewed from component side of pcb. male footprint shown. female footprint is mirrored. power contact dia. pdim. .125 .144 min. .078 .098 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/62 dimensions shown are in inches. 13w6 straight power contacts 17w5 straight power contacts 21wa4 straight power contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. power contact dia. pdim. .125 .144 min. .078 .098 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. viewed from component side of pcb. male footprint shown. female footprint is mirrored. power contact dia. pdim. .125 .144 min. .078 .098 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. viewed from component side of pcb. male footprint shown. female footprint is mirrored. power contact dia. pdim. .125 .144 min. .078 .098 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/63 viewed from component side of pcb. male footprint shown. female footprint is mirrored. 21w4 straight power contacts 25w3 straight power contacts dimensions shown are in inches. viewed from component side of pcb. male footprint shown. female footprint is mirrored. power contact dia. pdim. .125 .144 min. .078 .098 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. power contact dia. pdim. .125 .144 min. .078 .098 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/64 27w2 straight power contacts 24w7 straight power contacts dimensions shown are in inches. viewed from component side of pcb. male footprint shown. female footprint is mirrored. viewed from component side of pcb. male footprint shown. female footprint is mirrored. power contact dia. pdim. .125 .144 min. .078 .098 min. power contact dia. pdim. .125 .144 min. .078 .098 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/65 36w4 straight power contacts 43w2 straight power contacts dimensions shown are in inches. viewed from component side of pcb. male footprint shown. female footprint is mirrored. viewed from component side of pcb. male footprint shown. female footprint is mirrored. power contact dia. pdim. .125 .144 min. .078 .098 min. power contact dia. pdim. .125 .144 min. .078 .098 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/66 47w1 straight power contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. power contact dia. pdim. .125 .144 min. .078 .098 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. dimensions shown are in inches.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com ds/67 d-subminiature connectors: footprints viewed from component side of pcb. male footprint shown. female footprint is mirrored. 2w2 right angle power contacts 3w3 right angle power contacts mating face of connector mating face of connector mating face of connector 4w4 right angle power contacts power contact dia. pdim. .125 .144 min. .078 .098 min. viewed from component side of pcb. male footprint shown. female footprint is mirrored. power contact dia. pdim. .125 .144 min. .078 .098 min. power contact dia. pdim. .125 .144 min. .078 .098 min. viewed from component side of pcb. male footprint shown. female footprint is mirrored. 5w5 right angle power contacts mating face of connector viewed from component side of pcb. male footprint shown. female footprint is mirrored. power contact dia. pdim. .125 .144 min. .078 .098 min. dimensions shown are in inches.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/68 6w6 right angle power contacts 7w7 right angle power contacts mating face of connector mating face of connector dimensions shown are in inches. viewed from component side of pcb. male footprint shown. female footprint is mirrored. power contact dia. pdim. .125 .144 min. .078 .098 min. viewed from component side of pcb. male footprint shown. female footprint is mirrored. power contact dia. pdim. .125 .144 min. .078 .098 min. 8w8 right angle power contacts mating face of connector power contact dia. pdim. .125 .144 min. .078 .098 min. viewed from component side of pcb. male footprint shown. female footprint is mirrored.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com ds/69 d-subminiature connectors: footprints 5w1 right angle power contacts mating face of connector 7w2 right angle power contacts dimensions shown are in inches. power contact dia. pdim. .125 .144 min. .078 .098 min. viewed from component side of pcb. male footprint shown. female footprint is mirrored. viewed from component side of pcb. male footprint shown. female footprint is mirrored. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. power contact dia. pdim. .125 .144 min. .078 .098 min. mating face of connector 11w1 right angle power contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. power contact dia. pdim. .125 .144 min. .078 .098 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. mating face of connector
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/70 mating face of connector mating face of connector 13w3 right angle power contacts 9w4 right angle power contacts viewed from component side of pcb. male footprint shown. female footprint is mirrored. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. power contact dia. pdim. .125 .144 min. .078 .098 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. power contact dia. pdim. .125 .144 min. .078 .098 min. viewed from component side of pcb. male footprint shown. female footprint is mirrored. dimensions shown are in inches.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com ds/71 d-subminiature connector: footprints 17w2 right angle power contacts 21w1 right angle power contacts mating face of connector mating face of connector mating face of connector 13w6 right angle power contacts dimensions shown are in inches. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. power contact dia. pdim. .125 .144 min. .078 .098 min. viewed from component side of pcb. male footprint shown. female footprint is mirrored. viewed from component side of pcb. male footprint shown. female footprint is mirrored. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. power contact dia. pdim. .125 .144 min. .078 .098 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. power contact dia. pdim. .125 .144 min. .078 .098 min. viewed from component side of pcb. male footprint shown. female footprint is mirrored.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/72 17w5 right angle power contacts 21wa4 right angle power contacts mating face of connector mating face of connector signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. power contact dia. pdim. .125 .144 min. .078 .098 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. power contact dia. pdim. .125 .144 min. .078 .098 min. viewed from component side of pcb. male footprint shown. female footprint is mirrored. dimensions shown are in inches. viewed from component side of pcb. male footprint shown. female footprint is mirrored.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com ds/73 d- subminiature connectors: footprints 21w4 right angle power contacts mating face of connector mating face of connector 25w3 right angle power contacts dimensions shown are in inches. viewed from component side of pcb. male footprint shown. female footprint is mirrored. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. power contact dia. pdim. .125 .144 min. .078 .098 min. viewed from component side of pcb. male footprint shown. female footprint is mirrored. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. power contact dia. pdim. .125 .144 min. .078 .098 min.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connectors: footprints ds/74 27w2 right angle power contacts mating face of connector 24w7 right angle power contacts mating face of connector signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. power contact dia. pdim. .125 .144 min. .078 .098 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. power contact dia. pdim. .125 .144 min. .078 .098 min. dimensions shown are in inches. viewed from component side of pcb. male footprint shown. female footprint is mirrored. viewed from component side of pcb. male footprint shown. female footprint is mirrored.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com ds/75 d-subminiature connectors: footprints 36w4 right angle power contacts 43w2 right angle power contacts mating face of connector mating face of connector dimensions shown are in inches. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. power contact dia. pdim. .125 .144 min. .078 .098 min. signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. power contact dia. pdim. .125 .144 min. .078 .098 min. viewed from component side of pcb. male footprint shown. female footprint is mirrored. viewed from component side of pcb. male footprint shown. female footprint is mirrored.
winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com d-subminiature connecors: footprints ds/76 mating face of connector 47w1 right angle power contacts signal contact dia. ddim. .040 .055 min. .030 .045 min. .024 .040 min. power contact dia. pdim. .125 .144 min. .078 .098 min. dimensions shown are in inches. viewed from component side of pcb. male footprint shown. female footprint is mirrored.
ds/77 cable reference table winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com cable rg-402 rg-405 center conductor .0359 .0201 o.d. dielectric .1175 .0658 o.d. jacket .141 .086 impedance (ohms) 50 50 impedance (ohms) 50 50 50 50 50 75 93 93 93 75 50 50 50 50 50 75 75 95 75 75 50 50 95 50 93 50 50 50 50 50 50 cable rg-8a/u rg-9b/u rg-55 rg-58 rg-58a rg-59 rg-62 rg-62a rg-71 rg-140 rg-141 rg-141a rg-142 rg-174 rg-178 rg-179 rg-179b/u rg-180 rg-187 rg-187a/u rg-188 rg-188a/u rg-195 rg-196 rg-210/u rg-213/u rg-214/u rg-223 rg-303 rg-316 rg-316 ds center conductor .0285 .0285 .032 .038 .0071 .023 .025 .0253 .025 .025 .039 .0390 .039 .019 .012 .012 .0040 .012 .012 .0040 .020 .0067 .012 .012 .0253 .0296 .0296 .032 .039 .020 .020 o.d. dielectric .285 .280 .116 .116 .116 .146 .146 .146 .146 .146 .116 .116 .116 .060 .034 .060 .063 .102 .060 .060 .060 .060 .102 .034 .146 .285 .285 .116 .116 .060 .060 o.d. shield - - .176 .150 - .191 .191 - .208 .176 .146 - .171 .080 .054 .084 - .124 .084 - .081 - .124 .054 - - - .176 .146 .081 .102 o.d. jacket .405 .420 .176 .150 .195 .191 .191 .242 .208 .176 .146 .190 .171 .080 .054 .084 .100 .124 .084 .11 .081 .110 .124 .054 .242 .405 .425 .176 .146 .081 .102
ds/78 mounting hole layouts winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com dimensions shown are in inches. number 060 a number 060 b number 060 c number 065 number 066
ds/79 winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com part numbers a dim b dim c dim 200-510-0360g 201-510-0360g 1/4 5/16 5/64 200-510-0362g 201-510-0362g 9/32 7/32 5/64 200-510-0630g 201-510-0630g 1/4 5/16 5/64 200-510-1070g 201-510-1070g 5/16 3/8 5/64 200-510-1160g 201-510-1160g 5/16 3/8 5/64 cable assembly procedures: 5-07
ds/80 winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com part numbers a dim b dim c dim 202-510-0360g 203-510-0360g 15/64 3/8 1/16 202-510-0630g 203-510-0630g 15/64 3/8 1/16 202-510-1070g 203-510-1070g 5/16 27/64 3/32 202-510-1160g 203-510-1160g 5/16 27/64 3/32 cable assembly procedures: 5-08
ds/81 winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com cable assembly procedures: 5-09 part numbers a dim b dim 200-510-0850g 201-510-0360g 5/32 5/64 200-510-1410g 201-510-0630g 7/64 5/64 210-510-0850g 211-510-1070g 5/32 5/64 210-510-1410g 211-510-1160g 7/64 5/64 270-510-0850g 271-510-0850g 5/32 5/64 270-510-0850g 271-510-1410g 7/64 5/64
ds/82 cable assembly procedures: 5-10 winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com part numbers a dim b dim 202-510-0360g 203-510-0360g 5/32 3/32 202-510-0630g 203-510-0630g 7/64 3/32 212-510-1070g 203-510-1070g 5/32 3/32 212-510-1160g 203-510-1160g 7/64 3/32 272-510-0850g 273-510-0850g 5/32 3/32 272-510-1410g 273-510-1410g 7/64 3/32
ds/83 cable assembly procedures: 5-15 winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com part numbers a dim 310-510-0850g 311-510-0850G .020 310-510-1410g 311-510-1410g .025 400-510-0850g 401-510-0850g .020 400-510-1410g 401-510-1410g .025
ds/84 cable assembly procedures: 5-16 winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com
ds/85 cable assembly procedures: 9-01 winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com part numbers a dim b dim c dim 200-910-0360g 201-910-0360g 1/4 5/16 5/64 200-910-0630g 201-910-0630g 1/4 5/16 5/64 200-910-1070g 201-910-1070g 5/16 3/8 5/64 200-910-1160g 201-910-1160g 5/16 3/8 5/64
ds/86 cable assembly procedures: 9-02 winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com part numbers a dim b dim c dim 202-910-0360g 203-910-0360g 15/64 3/8 1/16 202-910-0630g 203-910-0630g 15/64 3/8 1/16 202-910-1070g 203-910-1070g 5/16 27/64 3/32 202-910-1160g 203-910-1160g 5/16 27/64 3/32
ds/87 cable assembly procedures: 9-07 winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com part numbers center contact only crimp tool positioner setting 240-910-0630g 241-910-0630g t2400 p0630 4 240-910-1070g 241-910-1070g t2400 p0630 4 260-910-0630g 261-910-0630g t2400 p0630 4 260-910-1160g 261-910-1160g t2400 p0630 7 260-910-1161g 261-910-1161g t2400 p0630 7 290-910-0630g 291-910-0630g t2400 p0630 4 290-910-1160g 291-910-1160g t2400 p0630 7 290-910-1161g 291-910-1161g t2400 p0630 7
ds/88 cable assembly procedures: 9-16 winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com part numbers a dim b dim ferrule hex. size 312-910-0630g 313-910-0630g .234 .312 .128 312-910-0631g 313-910-0631g .234 .312 .151 312-910-1160g 313-910-1160g .312 .375 .213 312-910-1161g 313-910-1161g .312 .375 .213 dimensions shown are in inches.
ds/89 connector tools winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com crimp tool (for hex dies) part number t-1001 die set part number a hex length b hex length t-1001-2 .128 .325 .105 .325 t-1001-3 .213 .325 .178 .325 t-1001-5 .314 .400 .155 .400 center contact crimping tool part number t-2400 positioner part number p0630 note: to be used with crimp tool (t-1001) note: to be used with center contact crimping tool (t-2400) dimensions shown are in inches.
contact withdrawl tool part number t-1000 connector tools ds/90 winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com dimensions shown are in inches. tool for inserting stabilizing ring into housing part number t-1004 insertion tool coax contacts part number t-1003
ds/91 winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com other product offerings
other product offerings ds/92 winchester/retconn 400 park road ? watertown, connecticut 06795-5000 ? phone: (860) 945-5000 ? fax: (860) 945-3950 ? internet: http://www.litton-w ed.com our products are limited only by your imagination
rdm combination d-subminiature connectors winchester/retconn re-order number: cat-combo-d2000

▲Up To Search▲

Price & Availability of 311-510-0850G

	To Download 311-510-0850G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .